2-Ton vehicle jacks can be ratcheted up and down for easy height adjustment, making it easier to change your flat tire or to get up under your vehicle for minor repairs. Always use jack stands in pairs for safety.
Features:
Specs:
Note: Always use jacks in pairs.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at Part Number PTW41021. These are the Performance Tool 2 ton jack stands. The jack stands are designed to position under your vehicle or trailer at points specified by the vehicle manufacturer that way you can make sure you get these at the proper load support points. You've got the ratchet column right here, so it's got the ratchet design for easy adjustment. Then you're going to have this control lever that's going to lower or rise. With it in the rise position, that's going to allow this to move freely and then with it in the lowered position, that's going to lock the ratchet column or center column in place. So it's nice that those ratchets are here on the center column for safe operation.
You always want to be sure to use your jack stands in pairs. These are going to be made from a steel construction with a tough enamel finish. The jack stands are going to be yellow in color and the ratchet columns are going to be white in color. Each stand is going to have a capacity of 4,000 pounds. The minimum lift height, which is going to be this right here, is going to be 10 3/4" from the ground to this area right here. If we have it all the way extended, which is in this position right here, that's going to give us a maximum lift height from the ground to this point right here of 16 3/4". We're going to take a measurement of the base.
Measuring this direction outer edge to outer edge. That's going to give us a measurement of 6 11/16". Measuring this direction outer edge to outer edge. We're looking at 6 15/16". With this part number you are going to get 2 jack stands. Very simple operation.
What you would do is you'd position the stands under your vehicle with your vehicle already lifted in the air and then you can either just pull this up because it's got the ratchet design or you can lift up on that control lever and adjust these where you need the saddle to make contact with the vehicle. So get that to the desired height or just underneath contact with the vehicle, push the control lever down to lock the pall 00:02:25 into place and then you can make sure the pall 00:02:28 is full engaged in the teeth and then simply and carefully lower the load onto the stands and it's going to do a good job of supporting it. Now one thing I do want to mention is right here there's a sticker that says "Caution" and then there's a small little tab. It says that you want to bend this tab after inserting the ratchet bar. That's going to keep the ratchet bar from being able to be fully removed. So right now you can see I can fully remove that With that tab bent, it's going to catch on this little raised area here and that'll keep it from being able to be fully removed from the actual stand. That's going to do it for today's look at Part Number PTW41021..
Average Customer Rating: 4.7 out of 5 stars (14 Customer Reviews)
2-Ton vehicle jacks can be ratcheted up and down for easy height adjustment, making it easier to change your flat tire or to get up under your vehicle for minor repairs. Always use jack stands in pairs for safety.Great product and exactly as advertised. Use them to support boat tongue while in storage.
These are well built and rugged jack stands that will hold up anything that I could ever put on them.
Well built and sturdy, takes up a small space in my tool box!
Works as expected
fast shipping and I received exactly what I ordered. Good quality tool.
Delivered right on time and got the new hub on the axle. Hope for smooth sailing on the road. Nice order fulfillment!
Seem well made. Function as expected.
Do you have a question about this Automotive Tool?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.